Cleaning a Food Processor

A step by step guide to cleaning a food processor: taking it apart, washing the bowl, lid and blade, wiping the base and handle, and handling sticky residue.

8 min read1 views
— · 0 votes
Contents
  1. Unplug and take the processor apart
  2. Scrape and rinse before washing
  3. Hand washing the bowl, lid and blade
  4. Hand washing versus the dishwasher
  5. Wiping the base and handle
  6. Cleaning the lid, feed tube and seals
  7. Tackling sticky dough and strong odors
  8. Reassembling and storing the machine
  9. Food Processor Cleaning Questions
  10. How do I clean a food processor step by step?
  11. Can the food processor bowl and blade go in the dishwasher?
  12. How do I clean the food processor base without damaging it?
  13. What is the easiest way to clean a food processor between uses?
  14. Does a self cleaning food processor really clean itself?
  15. How do I get rid of odors in a food processor bowl?

Cleaning a food processor means taking it apart first, then washing the bowl, lid and blade by hand or in the dishwasher, and wiping the base and handle with a damp cloth. The motor base never goes in water. A quick rinse between uses keeps food residue from drying and makes the full wash easier.

  • Unplug the machine and take it apart before any water touches it.
  • Wash the bowl, lid and blade separately, and keep the base dry.
  • Rinse soon after use so residue does not harden in corners and seals.
  • Check your manual before putting parts in a dishwasher.
  • Wipe the handle and buttons rather than soaking them.

Unplug and take the processor apart

Disassembly is the first step of cleaning a food processor, and it starts with pulling the plug. Remove the pusher, the lid, the blade and the bowl in the order your manual shows. A machine that is still plugged in can start if a button is pressed by accident.

Handle the blade by its plastic hub or by the edge away from the cutting edge. Food processor blades stay sharp and can cut a sponge or a hand. Set the blade flat in the sink rather than dropping it into a pile of dishes.

Separate any removable parts such as a feed tube insert, a dough blade or a shredding disc. Loose parts clean faster and dry better than parts left stacked together. Keep the base and its cord away from the sink while the rest is washed.

Scrape and rinse before washing

Food residue removal begins with scraping the bowl into the trash or a container, not into the drain. A rubber spatula lifts thick mixtures such as dough or paste from the sides. Rinsing the empty bowl under warm water loosens what is left.

Warm water and a little dish soap are enough for most mixtures. Hot water can be used on glass or sturdy plastic, but very hot water on thin plastic parts can distort them. Let the water run into the feed tube so it reaches the inside of the lid.

Rinsing after use takes a moment and prevents a dried crust from forming. Dried food sticks to seals, corners and the space around the blade hub. A short soak in warm soapy water softens that crust before scrubbing.

Hand washing the bowl, lid and blade

Hand washing the bowl and blade is the safest choice when you are unsure about heat limits. Fill the bowl with warm soapy water and wash the inside with a soft cloth or sponge. A bottle brush reaches the corners of a tall bowl.

Wash the lid on both sides, paying attention to the feed tube and the locking tabs. Food collects under the rim and around the opening where the pusher slides in. A small brush cleans those narrow spots without scratching the plastic.

Wash the blade last and keep your fingers clear of the cutting edge. Hold the blade by the hub and scrub outward from the center. Rinse every part under running water and check that no film of soap remains.

Hand washing versus the dishwasher

Hand washing versus dishwasher cleaning depends on what the manufacturer allows for each part. Many bowls, lids and blades are labeled dishwasher safe on the top rack, but some blades and seals are not. The manual for your model is the only reliable guide.

The heat and long soaking of a dishwasher can warp thin plastic or dull a blade over time. Detergent can also affect some seals and clear plastics. If a part is not marked dishwasher safe, wash it by hand instead.

Place dishwasher-safe parts so water can reach every surface and so the blade cannot rattle against other dishes. Secure the blade in a basket or on a rack away from cups and cutlery. Run the cycle and let the parts air dry fully.

Wiping the base and handle

The base and handle are wiped, never soaked, because the motor and controls sit inside. Unplug the machine and use a cloth wrung out in warm soapy water. Wipe the outside shell, the buttons and the area around the shaft.

Cleaning a food processor handle means reaching the seam where the handle meets the bowl or the base. A soft brush or a cloth wrapped around a blunt stick clears crumbs from that groove. Do not pour water into the handle or the button recesses.

Dry the base with a clean cloth and let it air before storing the machine. Water left near the shaft or the vents can travel inside the housing. A dry base also keeps the cord and plug safe.

Cleaning the lid, feed tube and seals

The lid and feed tube collect food in places that a quick rinse misses. Remove the pusher and any inner feed tube insert, then wash each piece on its own. Run water through the tube from both ends.

Cleaning a food processor lid includes the locking tabs and the gasket or seal if your model has one. Food trapped under a seal can spoil and affect the fit of the lid. Check the manual before removing a seal, and press it back into its groove after washing.

Dry the lid upside down so water drains out of the tube and the rim. A lid stored wet can grow odor in the closed space. Leave the lid off the bowl until every part is dry.

Tackling sticky dough and strong odors

Dough and sticky mixtures need a soak before scrubbing. Fill the bowl with warm water and let it stand so the dough softens and lifts away. A plastic scraper removes the bulk without scratching the bowl.

Strong odors from onion, garlic or fish can linger in plastic and seals. A paste of baking soda and water applied to the bowl and left briefly helps absorb the smell. Wash and rinse afterward as usual.

Stains on clear plastic or white bowls fade with a soak in warm water and dish soap. Avoid abrasive pads, which scratch plastic and leave space for residue. Scratched surfaces hold food and odor more easily.

Reassembling and storing the machine

Reassembly is the last step, and every part should be completely dry first. Water left in the bowl hub or under the blade can drip onto the motor. Dry the shaft area on the base with a cloth before fitting the bowl.

Fit the bowl, then the blade, then the lid, checking that each part locks as the manual describes. Never force a lid or a blade that does not seat. A part that will not lock may be wet, misaligned or fitted in the wrong order.

Store the processor with the lid off or loosely set so air can circulate. Keep the blade in a drawer or a holder rather than loose in the bowl. Coil the cord without kinks and keep the machine away from water.

Food Processor Cleaning Questions

How do I clean a food processor step by step?

Cleaning a food processor step by step means unplugging it, taking it apart, scraping out residue, rinsing, washing the bowl, lid and blade, wiping the base and handle, drying everything and reassembling. Work on the parts separately and keep the motor base away from running water. Dry all parts before they go back on the machine.

Can the food processor bowl and blade go in the dishwasher?

The food processor bowl and blade can go in the dishwasher only if the manufacturer marks them dishwasher safe. Many models allow the bowl, lid and blade on the top rack, but some blades and seals are hand wash only. Check your manual for each part before loading the machine.

How do I clean the food processor base without damaging it?

Clean the food processor base with a cloth wrung out in warm soapy water and never soak it. Wipe the shell, buttons and shaft area, then dry with a clean cloth. Water must not enter the vents, the button recesses or the motor housing.

What is the easiest way to clean a food processor between uses?

The easiest way to clean a food processor between uses is a quick rinse of the bowl, lid and blade in warm water before residue dries. A short soak with a drop of dish soap lifts light residue. Wipe the base and dry the parts before the next task.

Does a self cleaning food processor really clean itself?

A self cleaning food processor does not clean itself in the way the name suggests. Some models offer a pulse-and-rinse routine that swirls soapy water in the bowl, and the bowl, lid and blade still need washing. The base and handle always need wiping by hand.

How do I get rid of odors in a food processor bowl?

Odors in a food processor bowl fade with a soak in warm soapy water and a paste of baking soda and water. Apply the paste to the bowl, leave it briefly, then wash and rinse. Dry the bowl fully before storing it with the lid off.

Read next

Latest articles